Subject: [IBIS-Users] Model Selector Keyword for Series Pin Mapping
From: Haque, Moshiul (mhaque@ti.com)
Date: Tue Apr 23 2002 - 17:07:22 PDT
Hi All,
While creating an IBIS model for series switch, I have noticed that the
IBISCHK3.2 gives an error if the model selector keyword is used to define
two different models for the same model_name in series pin mapping.
IBISCHK3.2 gives an error saying that the model (that is defined in the
series pin mapping under model_name column) is not defined. Model selector
keyword works fine for other models (input, terminator or 3-state) Any idea
what did I do wrong?
[Series Pin Mapping] pin_2 model_name function_table_group
|
3 2 Q3384A_IO_S 1
[Model Selector] Q3384A_IO_S
|
Q3384A_IO_S_33 3.3 volt Vcc
Q3384A_IO_S_25 2.5 volt Vcc
If I use two different series pin mapping with separate model but with same
pin mapping will that be an incorrect approach?
Example:
[Series Pin Mapping] pin_2 model_name function_table_group
|
3 2 Q3384A_IO_S_25 1
3 2 Q3384A_IO_S_33 1
Any suggestion would be greatly appreciated.
Regards
Moshiul Haque
Standard Linear and Logic Marketing
Texas Instruments Incorporated
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Tue Apr 23 2002 - 17:22:47 PDT