Subject: [IBIS-Users] IBIS Package Model
From: LIM,KEE-CHAI (A-Singapore,ex1) (kee-chai_lim2@agilent.com)
Date: Tue May 28 2002 - 02:06:26 PDT
Hi guys,
I have a question on IBIS package model:
If I have a file containing RLC which is extracted from a package using some extraction tools such as Ansoft, can I represent it in IBIS model?
When I look at the IBIS file, it always contain other sections on capturing timing information such as V/I curve for rising and falling waveforms. It only captures package modeling in one of the sections in IBIS modle file.
In my case, Can I create a IBIS model file only contains package information and no timing information?
Thank you very much.
Best Regards
kee chai
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Tue May 28 2002 - 02:34:06 PDT