Subject: Re: [IBIS-Users] model generation issue
From: Syed Huq (shuq@cisco.com)
Date: Tue Oct 15 2002 - 17:45:51 PDT
If it is for ESD leave that in.
NCSU is working on the next generation of s2ibis2..
Syed
>Date: Tue, 15 Oct 2002 16:51:53 -0700
>From: Eric Hsu <ehsu@netlogicmicro.com>
>X-Accept-Language: en
>MIME-Version: 1.0
>To: ibis-users@eda.org
>Subject: [IBIS-Users] model generation issue
>
>Hi,
>
>Fisrt, when using s2ibis2 to generate ibis file(ver 2.1), should I take
>off "stand-alone" esd dummy diodes, which are not part of output buffer
>but just only for enhancing esd protection?
>Second, is there any free tool to generate ibis file for ver 3.2 or 4.1?
>
>Best Regards
>
>-eric
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Tue Oct 15 2002 - 17:54:09 PDT