Subject: [IBIS-Users] using ibis with spice/ specctra
From: Angulo, John (john_angulo@mentorg.com)
Date: Mon Nov 04 2002 - 17:56:29 PST
The following is posted on behalf of Bill Panos at Sanmina-SCI Corp. Please send any private replies to bill.panos@sanmina-sci.com only.
-------------------------------------------
typical is there is no power or gnd pins assigned in the ibis model
(right?) just output and input pins. How does one really adjust say the
nominal VCC (VDD) to say the maximum voltage value...possibly I'm just
missing something on how ibis models functions.
thanks
Bill
--------------E56512A3EA34D4E3E080BE75
Content-Type: text/x-vcard; charset=us-ascii;
name="bill.panos.vcf"
Content-Transfer-Encoding: 7bit
Content-Description: Card for bpanos
Content-Disposition: attachment;
filename="bill.panos.vcf"
begin:vcard
n:Panos;Bill
tel;fax:408.904.2095
tel;work:408.904.2060
x-mozilla-html:FALSE
org:Sanmina-SCI Corp.
version:2.1
email;internet:bill.panos@sanmina-sci.com
title:Signal Integrity Engineer
adr;quoted-printable:;;2000 Ringwood=0D=0ASan Jose, Ca 95131;;;;
fn:Bill Panos
end:vcard
--------------E56512A3EA34D4E3E080BE75--
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Mon Nov 04 2002 - 18:04:43 PST