RE: [IBIS-Users] PSPICe


Subject: RE: [IBIS-Users] PSPICe
From: Lynne Green (lgreen@cadence.com)
Date: Thu Jan 23 2003 - 08:48:25 PST


Hi, Bill,

Since this is a product-specific question, you might want to
also post this on the Cadence PSPICE reflector.
http://www.orcadpcb.com/

- Lynne

-----Original Message-----
From: bpanos [mailto:bill.panos@sanmina-sci.com]
Sent: Wednesday, January 22, 2003 5:48 PM
Cc: ibis-users@eda.org
Subject: [IBIS-Users] PSPICe

With respect to Cadence PSPICe, has anyone used the general laplace
expressions to model frequency dependent skin and dielectric losses
(general expressions for G and R), and if so, where does one insert the
expression? (my fear is that this might be a post process analysis). I'm
using either a TLOSSY or TLUMPED

thanks
Bill
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993



This archive was generated by hypermail 2b28 : Thu Jan 23 2003 - 09:17:00 PST