Subject: [IBIS-Users] Differences between '*_fixture' & '*_ref' parameters
From: Lior Aviv (RM18440@email.sps.mot.com)
Date: Wed Mar 26 2003 - 22:01:45 PST
Hi,
While creating an ibis model, I encountered a misunderstanding
regarding the differences between the '*_ref' parameters and the
'*_fixture' parameters.
It seems like both are being used for loads.
In addition, I have noticed that the '*_fixture' parameters are being
used only at the 'rising/falling waveform' simulations.
Does anybody know what the differences are ?
Thanks in advance,
Lior Aviv
Motorola Semiconductor Israel.
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Wed Mar 26 2003 - 22:09:56 PST