Subject: [IBIS-Users] IBIS connector Models
From: Sudheer B S (sudheer@ecadtech.com)
Date: Thu Apr 03 2003 - 15:37:24 PST
I have some quections regarding the IBIS connector Models
How these IBIS connector Models will be helpful to Specctraquest Users ??
(because in Specctraquest Package models will be used for connectors )
Which tool will support these Connector Models ??
Does these models will be helpful in Multiboard analysis ?? since
it takes signal name instead of UNSPEC
Thank you
SUDHEER B S
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Thu Apr 03 2003 - 05:40:18 PST