Subject: [IBIS-Users] IBIS Model of LVDS cell
From: akhilesh.chandra@st.com
Date: Fri Jul 18 2003 - 01:28:16 PDT
Hello All,
I am going to generate IBIS model of LVDS cell with terminated
resitence of 100ohm.
Can any one of you guide how I will put information of two pad in my
models and what setup is required to make simulation. If you have some
document it help me a lot.
Please discard my last mail.
With Best Regards
Akhilesh
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Fri Jul 18 2003 - 01:29:37 PDT