Subject: [IBIS-Users] C_comp value in IBIS model
From: Abril, Giovanni (giovanni.abril@ngc.com)
Date: Fri Aug 01 2003 - 14:13:11 PDT
Hello IBIS gurus,
I've created an IBIS model using a spice netlist from the vendor, and I'm wondering what to do with C_comp. My rising and falling waveforms include the effect of C_comp, but what should I put in the IBIS model? I have a spec sheet that says min C_comp is 2.8pF, max is 10pF. Currently I have 5.0pF for typ, 2.8pF min and 10pF max.
Thanks,
Giovanni
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Fri Aug 01 2003 - 14:15:54 PDT