Subject: [IBIS-Users]DC Sweep for the pullup IV curve
From: Allen Chao (achao@synopsys.com)
Date: Thu Aug 14 2003 - 12:50:37 PDT
Hi IBIS experts,
I have a question concerning the sweep. I have a 3.3V power supply for my
device. However, the logic high voltage is 0.4V and logic low is 0V for my
one of my outputs. Do I do the DC Sweep at the output from -3.3V to 6.6V
or -0.4V to 0.8V?
Thanks a lot for the help,
Allen Chao
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Thu Aug 14 2003 - 12:52:22 PDT