[IBIS-Users] ECL LVDS model


Subject: [IBIS-Users] ECL LVDS model
From: SUDHEER (sudheer_tiptur@yahoo.co.in)
Date: Mon Aug 18 2003 - 06:19:12 PDT


Hi All
I am simulating ECL LVDS signals , i am finding it
difficult to understand the ibis convention on LVDS

Which parameter in differential pair signals will
define the swing ?
I have seen some 5v device buffers are paired
together (inv and noninv ) and Vdiff defined at 300 mv
I have not seen the volt swing definition in ibis file
!!

Can anybody suggest me the device where in I can get
ECL(100k) LVDS buffer Driver (IBIS)

Thanks In advance
SUDHEER

________________________________________________________________________
Yahoo! India Promos: Win TVs, Bikes, DVD players & more!
Go to http://in.promos.yahoo.com
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993



This archive was generated by hypermail 2b28 : Mon Aug 18 2003 - 06:20:52 PDT