Subject: [IBIS-Users] differential inputs
From: Allen Chao (achao@synopsys.com)
Date: Wed Aug 27 2003 - 10:34:40 PDT
MessageHi IBIS experts,
I am gathering the power clamp and ground clamp data for my differential
inputs. I have 2 inputs and their voltage has to be opposite of each other.
(i.e. when input A is 0, input B has to be 3.3V and when input A is 3.3V,
input B has to be 0V)
How should I set up the testbench for gathering power clamp/gnd clamp data?
Need a solution urgent!
Thanks in advance,
Allen Chao
Synopsys Inc.
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Wed Aug 27 2003 - 10:37:54 PDT