Subject: [IBIS-Users] query to ibis forum
From: kesavp (kesavp@spikeindia.com)
Date: Sun Sep 28 2003 - 19:55:12 PDT
Hi IBIS experts,
I am interested to capture part of the VI curve (pullup,pulldown, ground clamp and power clamp) range in small step size.
S2IBIS tool by default takes 0.05 or 0.1 V step size. I would like to know does IBIS spec recommends any specific step size.
Could any one please let me know how to go about making VI curves for small step size other than default value.
Thanks,
Kesav.
--- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.521 / Virus Database: 319 - Release Date: 9/23/2003|------------------------------------------------------------------ |For help or to subscribe/unsubscribe, email majordomo@eda.org |with just the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or email a written request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Sun Sep 28 2003 - 20:03:33 PDT