Date: Wed Oct 27 2004 - 04:53:43 PDT
Akhilesh CHANDRA wrote:
>Hello experts,
>
>I am making ibis models of differential cell in which output part is
>something like this
>In this VOA and VOB are output pads and commen mode voltage is 0.5V. If
>I apply any suplly on any pad then some current flow throgh 50 ohm
>resistence. I am not able to understand how I model this current so that
>every simulater read it. If I don't model it then there is drift in IBIS
>and spice result.
>
>Can any one help me to find out some solution.
>
>Regards
>Akhilesh
>
>
>
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
