The latest version of Synopsys Hspice, version 2004.09, uses the
ibischk4 tool, version 4.0.1. In a simulation I ran yesterday, Hspice
reported errors running the v4.0.1 ibischk4 with the rising and falling
waveforms when using an IBIS model as a driver.
Here's a sample of the errors:
ERROR - Model osoc2_od: The [Rising Waveform]
with [R_fixture]=60 Ohms and [V_fixture]=3.3V
has TYP column DC endpoints of 2.02V and 3.30v, but
an equivalent load applied to the model's I-V tables yields
different voltages ( 2.02V and 2.02V),
a difference of inf% and inf%, respectively.
ERROR - Model osoc2_od: The [Falling Waveform]
with [R_fixture]=60 Ohms and [V_fixture]=3.3V
has TYP column DC endpoints of 2.02V and 3.30v, but
an equivalent load applied to the model's I-V tables yields
different voltages ( 2.02V and 2.02V),
a difference of inf% and inf%, respectively.
An engineer at the device manufacturer said there are no errors when he
uses the ibischk4 v4.0.2 tool. Can someone explain what the differences
are between versions 4.0.1 and 4.0.2 of the ibischk4 tool and does
anyone know whether Synopsys will be moving to the latest ibischk4 tool
in the Hspice simulator?
Thanks and regards,
Fabrizio Zanella
Signal Integrity
Enterasys Networks
Andover, MA
Phone: 978-684-1340
fzanella@enterasys.com
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
Received on Wed Dec 15 06:57:01 2004
This archive was generated by hypermail 2.1.8 : Wed Dec 15 2004 - 06:59:12 PST