RE: [IBIS-Users] BIRD 95 Comments.

From: Syed Huq <shuq@cisco.com>
Date: Mon Jan 24 2005 - 09:25:31 PST

The loading condition will be similar to the R_fixture value used for
V/T curves. We also have recommended loading mentioned in BIRD95. One
such condition is 'no-load' as well.

BIRD95 allows maximum of 100 IvsT curves. Each can be under specific
user defined load as well.

- Syed

-- 
IBIS Vice-Chair & Webmaster
Cisco Systems, Inc
On Mon, 2005-01-24 at 00:46, Itzik Peleg wrote:
> Hello Syed
> 
> Sorry for my late replay.
> 
> I am still missing something. What are the conditions to capture the
> current? Capturing the current under some loading conditions can be
> different from other loading conditions. How the captured current is
> processed in order to yield the correct buffer loading on the power rail?
> Please elaborate.
> 
> Itzik 
> 
> -----Original Message-----
> From: Syed Huq [mailto:shuq@cisco.com] 
> Sent: Sunday, January 09, 2005 12:01 AM
> To: Peleg Itzik
> Cc: IBIS Users
> Subject: Re: [IBIS-Users] BIRD 95 Comments.
> 
> Hi Peleg, 
> 
> Thanks for your comments on the 7th teleconf. Some responses in-line -
> Syed
> 
> 
> On Sat, 2005-01-08 at 13:37, Peleg Itzik wrote:
> 
> > And back to BIRD 95:
> > 
> > The current is measured with the resistance and inductance of the power 
> > supply rail of the pad. While the rising and falling v(t) table are 
> > measured with ideal supply.
> > Isn't it better to measure the current on an ideal supply so the current 
> > is correlated to the voltage response that was capture in the rising or 
> > falling wave form.
> > Please elaborate why the current is measured with the inductance and 
> > resistance.
> 
> The L_xxx and R_xxx in the diagram are on-die parasitics. These are part
> of the encrypted SPICE you may have. We wanted to show that these
> components are present in your netlist as you make your measurements.
> 
> These user is *not* placing any specific L_xxx or R_xxx to make these
> measurements.
> 
> We do want time coreelated V/T and I/T. Ideal supply maynot give you the
> kind of SSN you wish to simulate.
> 
> Regards,
> Syed
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993
Received on Mon Jan 24 09:25:48 2005

This archive was generated by hypermail 2.1.8 : Mon Jan 24 2005 - 09:26:43 PST