Akhilesh The logic 1 and logic 0 states depend on the load attached to the buffer. If the load is an open circuit then the logic 0 will be the voltage in the pulldown table where the current is zero. The 1 will be the voltage in the pullup table where the current is zero. You can construct load lines and apply those to the IV tables to predict the output voltage for any load. Regards, Tom Dagostino Teraspeed Labs 13610 SW Harness Lane Beaverton, OR 97008 503-430-1065 http://www.teraspeed.com tom@teraspeed.com Teraspeed Consulting Group LLC 121 North River Drive Narragansett, RI 02882 401-284-1827 Teraspeed is the registered service mark of Teraspeed Consulting Group LLC -----Original Message----- From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org]On Behalf Of Akhilesh CHANDRA Sent: Monday, April 11, 2005 8:09 AM To: ibis-users@eda.org Cc: Akhilesh CHANDRA Subject: [IBIS-Users] logic0 and logic1 problem in IBIS models Hello , I am working on one of my differential cells. When I validate my IBIS models from two different simulator then I got two different logic 0 and logic1 values. To find out it's problem of simulator or my models I must know what are the logic0 and logic1 according to the models. Can any one have any idea how we can extract logic0 and logic1 from the model files. I am highly blocked due to this issue. Your help is deeply appreciated. Regards Akhilesh |------------------------------------------------------------------ |For help or to subscribe/unsubscribe, email majordomo@eda.org |with just the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or email a written request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993 |------------------------------------------------------------------ |For help or to subscribe/unsubscribe, email majordomo@eda.org |with just the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or email a written request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993Received on Mon Apr 11 09:54:39 2005
This archive was generated by hypermail 2.1.8 : Mon Apr 11 2005 - 09:57:23 PDT