RE: [IBIS-Users] .top file extension

I stand corrected. Someone older than me :) reminded me that there is an
ancient incantation script to convert a QUAD TOP file to an IBIS EBD
file. Any ICX user can run top2ebd from the $MGC_HOME/bin directory.
 

 
________________________________

From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On
Behalf Of Beal, Weston
Sent: Thursday, April 14, 2005 11:52 AM
To: Muck, Phil; ibis-users@eda.org
Subject: RE: [IBIS-Users] .top file extension


Phil,
 
The TOP file is used in the XTK simulator (Mentor Graphics) and is
equivalent to the IBIS EBD data. Most likely, the TOP file was created
by translating an EBD file. I don't think there is a TOP to EBD
translator, but it should be very straightforward since the data and
description method are generally the same.
 
Regards,
Weston
 

________________________________

From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On
Behalf Of Muck, Phil
Sent: Thursday, April 14, 2005 11:10 AM
To: 'ibis-users@eda.org'
Subject: [IBIS-Users] .top file extension



Done anyone know of board simulation with a .top file extension. 

Regards 
Phillip Muck 
Staff Engineer 
DATARAM Corp. 
(609)799-0071 ext 2323 
(609)897-7035 Fax 
pmuck@dataram.com 
<<Muck, Phil.vcf>> 


|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993