Lau , I also had a similar problem sometime back. And the way to resolve is to increase the simulation time. In your case, a small increase in sim time should do the job. Cheers , Vivek "lau yy" <tok47@hotmail.co To: ibis-users@eda.org m> cc: Sent by: Subject: [IBIS-Users] rising waveform owner-ibis-users@ eda.org 07/08/05 05:21 AM Dear ALL, Can someone show me my mistake? The warning message like below. WARNING - Model DQ0: The [Rising Waveform] with [R_fixture]=70 Ohms and [V_fixture_max]=3.1V has MAX column DC endpoints of 1.74V and 3.10v, but an equivalent load applied to the model's I-V tables yields different voltages ( 1.71V and 3.10V), a difference of 1.94% and 0.01%, respectively. Thanks alot. rdgs yylau |------------------------------------------------------------------ |For help or to subscribe/unsubscribe, email majordomo@eda.org |with just the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or email a written request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993 |------------------------------------------------------------------ |For help or to subscribe/unsubscribe, email majordomo@eda.org |with just the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or email a written request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993Received on Thu Jul 7 20:24:24 2005
This archive was generated by hypermail 2.1.8 : Thu Jul 07 2005 - 20:24:59 PDT