[IBIS-Users] 2 different working voltage range

From: lau yy <tok47_at_.....>
Date: Sun Oct 09 2005 - 03:09:53 PDT
Dear ALL,
 
 
Recently, I trying to built a model for 2 different working voltage range.
 
According to the data sheet, the product can work under 2 different voltage range, let say 2.60V and 3.30V.
 
But, when I modeling this product, I found that only 1 of them pass the IBIS checker (for 3.30V) . The other 1 (2.60V) fail with errors on Falling/Rising Waveform. The schematic and control file I use is the same. I just use 2different references voltages.
 
Can I conclude that the product just can work under the voltage range that pass the IBIS checker ?
 
Thanks
 
rdgs
yylau
|------------------------------------------------------------------ |For help or to subscribe/unsubscribe, email majordomo@eda.org |with just the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or email a written request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993 Received on Sun Oct 9 03:09:58 2005

This archive was generated by hypermail 2.1.8 : Sun Oct 09 2005 - 03:19:02 PDT