Hi IBIS Gurus! Currently I am working on differential IBIS model generation, and I have some questions regarding to differential IBIS model generation: 1.- If only 2.1 Is S2IBIS2 able to generate IBIS models for true differential buffers? 2.- When resistive common mode elements are used in the buffer outputs, how this resistors needs to be considered? Perhaps, in the same way as terminated buffers? 3.- How valid is the following proposed method: Secrets Revealed: Creating accurate LVDS IBIS models By Adam Tambone, Modeling Engineer, Interface Design Group, Fairchild Semiconductor Corp. South Portand, Maine PlanetAnalog April 3, 2002 I would really appreciatte if anyone can answer these questions. Thanks in advance!!! Best Regards: Esdras |------------------------------------------------------------------ |For help or to subscribe/unsubscribe, email majordomo@eda.org |with just the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or email a written request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993Received on Mon Jan 9 09:58:51 2006
This archive was generated by hypermail 2.1.8 : Mon Jan 09 2006 - 10:00:54 PST