Hi to all, the curves of IBIS model that my s2ibis2 produces have two numbers after the dot: 0.00 -15.78pA -0.24nA -10.56pA 0.10 8.74mA 4.38mA 15.94mA .... which is the manner to obtain a better accuracy , for example four numbers after dot ? (using this version of s2ibis) 0.00 -15.7823pA -0.2434nA -10.5622pA 0.10 8.7412mA 4.3812mA 15.9452mA .... many thanks. Fabio |------------------------------------------------------------------ |For help or to subscribe/unsubscribe, email majordomo@eda.org |with just the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or email a written request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993Received on Wed Mar 8 08:24:39 2006
This archive was generated by hypermail 2.1.8 : Wed Mar 08 2006 - 08:27:56 PST