RE: [IBIS-Users] Hspice problem for IBIS simulations

Hi Arpad,

  

     I have used following option in IBIS model



[Voltage Range]       1.8V            1.62V         1.89V



    So VSS is grounded i.e 0V



Let me know if you need  further information



Thanks & Best Regards

Kiran Kumar



________________________________

From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On
Behalf Of Muranyi, Arpad
Sent: Wednesday, March 15, 2006 8:31 AM
To: ibis-users@eda.org
Subject: RE: [IBIS-Users] Hspice problem for IBIS simulations



Kiran,



What is the voltage on the node "VSS"?  What

is the value inside the IBIS file for the

[Voltage Range] or [Pulldown Reference] keywords?



Arpad Muranyi

Intel Corporation

=================================================



________________________________

From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On
Behalf Of seshadri.kirankumar@wipro.com
Sent: Monday, March 13, 2006 2:22 AM
To: ibis-users@eda.org
Subject: [IBIS-Users] Hspice problem for IBIS simulations

Hi Experts,

   

     I have generated an Output Buffer IBIS model whose output swing is
+V to -V ,  IBIS model is Good to give out such +V to -V response
depending on appropriate load (75 ohms), this I verified with some SI
tool(spectra quest) using some dummy Input IBIS model , But when I
perform simulations  using Hspice  I am not seeing +V to -V swing,
instead it is swinging improperly from +V to 0  I have attached the
control deck for that simulation on IBIS model. 

      Could any one of you let me know whether my deck is proper or do I
need to add anything in HSPICE deck to see intended functionality?



Thanks in advance for your help on this



Best Regards

Kiran Kumar

        


The information contained in this electronic message and any attachments
to this message are intended for the exclusive use of the addressee(s)
and may contain proprietary, confidential or privileged information. If
you are not the intended recipient, you should not disseminate,
distribute or copy this e-mail. Please notify the sender immediately and
destroy all copies of this message and any attachments.

WARNING: Computer viruses can be transmitted via email. The recipient
should check this email and any attachments for the presence of viruses.
The company accepts no liability for any damage caused by any virus
transmitted by this email.

www.wipro.com






The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments.

WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email.

www.wipro.com
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993