[IBIS-Users] IBIS version number commonly supported

 
Hello All,
 
I'm working on generating IBIS models for some of our products but have a
question regarding IBIS version numbers supported by board-level
simulation/analysis tools today.  I'd like to use version 4.1 rather than
version 3.2 because of the extra resolution that is permitted in the
waveform data for the rising and falling edges (1000 points instead of only
100), but I would like some assurance that the IBIS simulators out there
will be able to handle version 4.1  Can anyone comment on what versions are
commonly supported these days?
 
thanks,
 
Dwayne Johnson
IC Design Engineer
Gennum Corporation,
4281 Harvester Road
Burlington, Ontario, Canada
L7L 5M4
 
website: www.gennum.com <http://www.gennum.com/> 
email: dwayne_j@gennum.com
phone: 905-632-2999 x 2640
fax: 905-633-8105



--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993