Hello, Mei Yee, Yes, this is standard for all of the I-V tables. It is highly recommended that all I-V tables should go from -Vcc to 2*Vcc in the completed IBIS model. More information can be found in the IBIS Cookbook. http://www.vhdl.org/pub/ibis/cookbook/cookbook-v4.pdf When you have completed a model, please feel free to send it to the IBIS Model Review Committee. http://www.eigroup.org/ibis/support.htm Best regards, Lynne "IBIS training when you need it, where you need it." Dr. Lynne Green Green Streak Programs http://www.greenstreakprograms.com 425-788-0412 lgreen22@mindspring.com ________________________________ From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On Behalf Of NG,MEI-YEE Sent: Tuesday, October 17, 2006 8:44 PM To: ibis-users@eda.org; ibis-users@eda.org; Ambrish Varma; Mirmak, Michael Subject: [IBIS-Users] Ground Clamp Reference Hi all, I used s2ibis3 to simulate my Input pad and I realized that the sweep range for Ground Clamp curves are from -Vcc to Vcc, where Vcc is the the value for typical. However, this range remains the same figure for ALL corners i.e. fast, slow and typical. This means that if my Vcc is 3V, the sweep range for all the corners is -3 to 3V, regardless of my Vcc at various corners. Is this the standard for Ground clamp? I tried using the keyword [GND clamp reference] 2.7 3 3.3 but the range still remains -3 to 3V. Kindly advice. Thank you. Best regards, Mei Yee -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993Received on Tue Oct 17 22:50:40 2006
This archive was generated by hypermail 2.1.8 : Tue Oct 17 2006 - 22:51:21 PDT