RE: [IBIS-Users] C Comp parameter

Mei Yee,
 
C_comp is certainly required for input buffers and is extracted in a
highly similar fashion to that used for C_comp on output buffers.  
 
- Michael Mirmak
  Intel Corp. 
  Chair, EIA IBIS Open Forum
 
 
________________________________

From: owner-ibis-users@server.eda.org
[mailto:owner-ibis-users@server.eda.org] On Behalf Of NG,MEI-YEE
Sent: Wednesday, October 18, 2006 00:11
To: ibis-users@server.eda.org; ibis-users@server.eda.org
Subject: [IBIS-Users] C Comp parameter



Hi all,

 

I was looking through the way to extract C_comp parameter for IBIS
models. It shows the method to find C_comp for an output buffer. How
about an input buffer? Is C_comp still required and how is it extracted?

 

Appreciate your kind response.

 

Thank you.

 

Best regards,

Mei Yee


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993