RE: [IBIS-Users] IBIS dual power supply

This may not be the best solution but you could edit the .sp file and
hardcode the VDD connection.
- Syed

________________________________

From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On
Behalf Of NG,MEI-YEE
Sent: Thursday, November 09, 2006 12:41 AM
To: Ambrish Varma; ibis-users@eda.org
Subject: [IBIS-Users] IBIS dual power supply



Hi experts,

 

Need your guidance in a simple question. My chip has dual power supply,
meaning AVDD and AGND for analog core and DVDD and DGND for digital
core. In the .s2i file Pin List, I specify each to be POWER and GND
model accordingly. But when I run the s2ibis3, it will only connect a
voltage source to AVDD and not to both the VDD. How do I specify the pin
list for this case?

 

Thank you.

 

Best regards,

Mei Yee


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993