RE: [IBIS-Users] any EDA tool can support .pkg ibis model?

Hello, Eric,
 
Both EBD and PKG models are limited in what features they support (for
example, EBD supports stubs, while PKG supports coupling).  The most
complete set of interconnect model features is found in IBIS ICM.
 
At this time, both Cadence and HyperLynx support Touchstone S-parameter
files, as used in ICM.  Other vendors might, too.  Other features of ICM are
supported to a greater or lesser degree by various vendors.
 
For further information, please see the ICM specification.  You can also
view my recent paper from the Mentor User2User conference this month
(http://www.mugweb.org/).
 
Best regards,
Lynne
 
 
"IBIS training when you need it, where you need it."
 
Dr. Lynne Green
Green Streak Programs
http://www.greenstreakprograms.com
425-788-0412
lgreen22@mindspring.com
 

 

  _____  

From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On Behalf
Of Eric Hsu
Sent: Thursday, March 22, 2007 7:16 PM
To: ibis-users@eda.org; ibis-users@eda.org
Subject: [IBIS-Users] any EDA tool can support .pkg ibis model?



Hi IBIS expert,

 

Is there any EDA tool can really simulate 3.2 version ibis model with
package model (*.pkg)? Right now, I can not use Hyperlynx 7.2 to run
simulation for it. The following format is an example:

 

[IBIS Ver]              3.2

[Comment Char]          |_char

[File Name]             abc.pkg

[File Rev]              1.0

[Date]                  March 22, 2007

[Source]                abc Corporation's result.

[Notes]            a

[Disclaimer]        a

[Copyright]          a

|

| insert package model from here to ibis

[Define Package Model]  abc

[Manufacturer]        a  

[OEM]                  a 

[Description]           a

|

[Number Of Pins]        1

|

[Pin Numbers]

a1 len=0 L=1n /

len=1.1 L=0.1n R=0.1 C=1p /

len=0 L=1n R=0.1 C=1p /

len=1.1 L=0.1n R=0.1 C=1p /

len=0 L=1n R=0.1 C=1p /

|

[End Package Model]

| end insertion

[End]

 

Because I am not sure whether EDA tool does support "stub" (red highlight)
portion, if any one can provide your experience, I will very appreciate!

 

Regards,

 

Eric

 

 


-- 
This message has been scanned for viruses and 
dangerous content by  <http://www.mailscanner.info/> MailScanner, and is 
believed to be clean. 


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.




--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993