Hello Experts, I have one query regarding vinh+ and vih-. According to IBIS spec we can define it by following way. TYP MIN MAX Vinh+ 2.0 NA NA Vinh- 1.6 NA NA Vinl+ 1.1 NA NA Vinl- 0.6 NA NA How we can extract vih+ and vinh- at one process, voltage and temp. In my view design switch at one point. How I can extract two values. Regards Akhilesh -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993Received on Mon Jul 2 02:46:24 2007
This archive was generated by hypermail 2.1.8 : Mon Jul 02 2007 - 02:47:46 PDT