[IBIS-Users] IV table voltage range for min max and typ corners

Hi Experts,

In IV tables (clamps, pullup and pulldown), how do we normalize the voltage
range correspoding to typical votage.
If we take 3.3 V domain, we need to simulate for -3.3 to 6.6 for typical
case, -3 to 6 for min and -3.6 to 7.2 in max.
Do we need to extrapolate the values in case min corner to get 3.3 to 6.6range ?

With respect to V-t curves, we can take Rref as 50 ohm and generate the V-t
curves. But the settling voltage may be less
than the Vmeas (half of Pad voltage) (in case of rising waveforms). Is it
acceptable ?

Let me know your answers.


Regards
Sudarshan

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993