RE: [IBIS-Users] IBIS model behaviour with variable voltage source.

From: Muranyi, Arpad <Arpad_Muranyi_at_.....>
Date: Fri Jan 04 2008 - 10:21:37 PST
Amit,

This is a difficult thing to model.  Please look at
BIRD95 and some related presentations from Sigrity
on the IBIS web site.  Unfortunately the web site is
down at the moment, so I can't give you specific links.

Arpad
======================================================= 

-----Original Message-----
From: owner-ibis-users@server.eda.org
[mailto:owner-ibis-users@server.eda.org] On Behalf Of Amit KUMAR
Sent: Thursday, January 03, 2008 9:44 PM
To: ibis-users
Subject: [IBIS-Users] IBIS model behaviour with variable voltage source.

Hello All,

I have an IBIS model which reproduces the Spice waveform for all cases.
But when i connect an inductor to the power supply and then connect it 
to IBIS model then the results
i get for IBIS models and for spice do not match...
Is this observation a limitation of IBIS Models?

Thanks a lot
Amit


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Fri Jan 4 10:22:04 2008

This archive was generated by hypermail 2.1.8 : Fri Jan 04 2008 - 10:23:08 PST