[IBIS-Users] S2IBIS3 problem with generating V-t tables.

Hi,

I am generating IBIS file with one of the slow cells. It takes long time to
rise (200ns) or fall. So i am giving higher simulation time 500ns for
generating V-t curves. But while limiting the points to 100, S2IBIS3 puts
the time value in 2 digit (in uS) and hence round off the decimal place to
nearest values. This will result in repeat of time values in IBIS file and
ibischk4 gives errors. How to overcome this bug and is there any way to
control the way of printing in IBIS source code file ?

Please find the attached file below and also the sample results.

WARNING (line  876) - Value 4.400000e-07 repeated in the First Column
ERROR (line  876) - Time value did not increase


Regards
Sudarshan

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.



--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993