[IBIS-Users] How to decide on simulation time.

From: Shrikant G Kadadevar <Shrikant.G.Kadadevar_at_.....>
Date: Tue Mar 04 2008 - 01:30:28 PST
Hello All,

Please can you help me to know, how we come to conclusion on the maximum 
simulation time.
Should this value depends on frequency.
Suppose if i have 100MHz frequency buffer what must be maximum 
simulation time.
Should the value be equal to 1/100MHz or  1/(2*100MHz).
Or should it be independent.


Thanking you
Shrikant GK


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Tue Mar 4 01:32:57 2008

This archive was generated by hypermail 2.1.8 : Tue Mar 04 2008 - 01:33:25 PST