[IBIS-Users] RE: [IBIS] IBIS development

Hello Ajey

 

There are some tool that you can buy (I encourage other to review
commercial tools for creating IBIS).

There is a free tool s2ibis which can be found here:

http://www.eigroup.org/IBIS/tools.htm

look for S2IBIS3 link.

 

If these tools doesn't answer all your needs then you will write your
own tool.

 

 

Itzik Peleg, Senior Signal Integrity Engineer
Marvell Israel Ltd.
Web site:  http://www.marvell.com <http://www.marvell.com/> 
P before printing this email, think about the environment This message
may contain confidential, proprietary or legally privileged information.
The information is intended only for the use of the individual or entity
named above. If the reader of this message is not the intended
recipient, you are hereby notified that any dissemination, distribution
or copying of this communication is strictly prohibited. If you have
received this communication in error, please notify us immediately by
telephone or by e-mail and delete the message from your computer.

________________________________

From: owner-ibis@server.eda.org [mailto:owner-ibis@server.eda.org] On
Behalf Of Ajay Kapoor
Sent: Monday, September 08, 2008 11:58 AM
To: ibis-users@server.eda.org; ibis@server.eda.org
Subject: [IBIS] IBIS development

 

Dear All

We want to start generating IBIS models for IO cells. I have gone
through cookbook and various documents available on the internet.

But I would like to know, how to actually start generating IBIS models ?

Is there any tool that is used to generate IBIS 4.2 models ? Do we have
to buy it or can it be downloaded for free from internet ? 

Or is it that I need to write a script that will run various
simulations( for IV VT Clamp curves etc ) and then extract the data from
those simulations to be put in IBIS format ?

Please guide me as to what should be done in this regard. 

Thanks

Ajay

 


-- 
This message has been scanned for viruses and 
dangerous content by MailScanner <http://www.mailscanner.info/> , and is

believed to be clean. 

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993