RE: [IBIS-Users] [IBIS] - modelling a Pseudo differentail buffer

Hi Muniswar

Please refer to the [Diff Pin] keyword in the IBIS spec.
Best regards
Itzik Peleg, Senior Signal Integrity Engineer
Email: itzikpe@marvell.com<mailto:itzikpe@marvell.com>
Web site:  http://www.marvell.com <http://www.marvell.com/>
P before printing this email, think about the environment This message may contain confidential, proprietary or legally privileged information. The information is intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by telephone or by e-mail and delete the message from your computer.
________________________________
From: owner-ibis-users@server.eda.org [mailto:owner-ibis-users@server.eda.org] On Behalf Of Muniswara Reddy Vorugu
Sent: Tuesday, September 16, 2008 3:39 PM
To: ibis-users@server.eda.org; ibis@server.eda.org
Subject: [IBIS-Users] [IBIS] - modelling a Pseudo differentail buffer

Hi,
I am modeling a pseudo differential buffer.
In this buffer, inverting and non-inverting pins are exactly same, except polarity.

Duplicating the tables looks to be an obvious way, but looks redundant.
Is there any better way than this way?

Thanks,
Muniswar


--
This message has been scanned for viruses and
dangerous content by MailScanner<http://www.mailscanner.info/>, and is
believed to be clean.
--
This message has been scanned for viruses and
dangerous content by MailScanner<http://www.mailscanner.info/>, and is
believed to be clean.
--
This message has been scanned for viruses and
dangerous content by MailScanner<http://www.mailscanner.info/>, and is
believed to be clean.

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993