[IBIS-Users] Correct use of [Temperature Range]

Hello Friends,

Let me once and for all try to nail down an issue that seem to be a 
constant source of confusion.

The IBIS model syntax defines the triplet order [typ] [min] [max].
But this relates to the overall case, not the individual parameter, 
right? So to make things match the real operational case the [min] of 
[Temperature Range] would really need to be the maximum temperature, right?

Looking at what others do is not much help here, I see examples of both 
variants, frequently from the same vendor(!). So an authorative answer 
would be appreciated.


Best regards,  Lars Snith
-- 
Those who can, Do
Those who can't, Simulate

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993