[IBIS-Users] Re: Cross talk with SI

Dear All,

Here i'm SI using a HyperLynx am only concentrated in simulating the Address 
and Data line which is operating at 133MHz. When simulting Data line 0 i.e 
D0 a cross talk with nighbour net D1 gets enabled (crosstalk) what should be 
the allowable crosstalk range and also i'm not sure how this cross talk 
looks at the simulator scope. Please explain on this...

Thanks & Regards,
Shiva. 



-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993