RE: [IBIS-Users] IBIS - AMI - questions

From: Anand Ramalingam <anandr_at_.....>
Date: Fri Jun 12 2009 - 13:47:36 PDT
Hi Arpad,

Thanks for your prompt reply and the pointers. 

[Arpad]

3)  A full fledged .IBS file alone is not going to help you much
    because there is really not much in the .IBS file other than a
    pointer to the AMI DLL and its parameter file (.ami).  What you
    need is a good example (i.e. a working DLL) with an appropriate
    parameter file (.ami) and a simulator that can run them.

[Anand] By any chance do we have a complete example (with ibis/dll/ami
files) on the web which I can download and simulate?

Thanks
Anand

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Fri Jun 12 13:55:19 2009

This archive was generated by hypermail 2.1.8 : Fri Jun 12 2009 - 13:56:36 PDT