Hello Upon reviewing the following presentation: http://www.eda.org/ibis/summits/jul09/katz1.pdf pages 3 through 6 Where the impulse respone is measured remains unlear. 1) I assume the ideal pulse is forced at the input of the Tx and the output is measured after the analog front end of the Rx (i.e. the input to the CDR). So my question is, where have other model developers forced the impulse (input or output of Tx), and measured the impulse reponse (input or output of Rx) that is then passed to AMI_Init? 2) If the pulse is indeed forced at the input of the Tx, and meausred at the output of the Rx (right before the CDR) does that not mean that AMI is NOT compatible with current IBIS models since you can't measure an output from an Rx input buffer? In which case, AMI should just be its own standalone standard not imbeded within an IBIS model (like ICM), shouldn't it? Regards, Eric ________________________________ This communication contains confidential information intended only for the addressee(s). If you have received this communication in error, please notify us immediately and delete this communication from your mail box. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993Received on Tue Sep 22 18:54:44 2009
This archive was generated by hypermail 2.1.8 : Tue Sep 22 2009 - 18:55:51 PDT