RE: [IBIS-Users] Clamp graphs issue.

Yes.

Thanks you.

I missed the sub model section.

 

  _____  

From: rrwolff@micron.com [mailto:rrwolff@micron.com] 
Sent: Thursday, October 22, 2009 7:19 PM
To: kobi.pinhas@wintegra.co.il; ibis-users@eda.org
Subject: RE: [IBIS-Users] Clamp graphs issue.

 

Kobi,

 

Is the Termination data contained in [Submodel] I-V curves?  Your IBIS
viewer program doesn't plot I-V data in Submodels.  You can look under the
[Model] keyword for something like the following:

 

[Add Submodel]

| Submodel Name        Mode

120ohm_ODT_1066         Non-Driving

 

Regards,

Randy

 

 

 

From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On Behalf
Of Kobi Pinhas
Sent: Thursday, October 22, 2009 9:57 AM
To: ibis-users@eda.org
Subject: [IBIS-Users] Clamp graphs issue.

 

Hi all.

I have some conceptual issue.

The next graph represents gnd clamp of an input model of a memory with 120
ohm ODT

This is model of a famous company which I download:

 

 

I don't understand how it is possible that the current is zero fot V> -0.5V.

The meaning of ODT is resistor that connected from the input to the gnd.

So for this range (when V>-0.5V) I was expecting to see linear current with
a slope that equal to the resistor.

 

For example when I simulated gnd clamp of an input buffer with 50 ohm ODT I
received the next plot:

 

 

You can see that the plot is liner for V> -0.5V as expected.

I looked in a lot of ibis file and I never saw common behavior.

So I guess that maybe I am doing something wrong.

 

I will be glad to hear your comments.

 

Thanks a lot.

 

Kobi.


-- 
This message has been scanned for viruses and 
dangerous content by  <http://www.mailscanner.info/> MailScanner, and is 
believed to be clean. 


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.



--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993