Re: [IBIS-Users] PullUp/PullDown toggle?

From: Lars Snith <Lars.Snith_at_.....>
Date: Tue Dec 15 2009 - 08:48:48 PST
Servus Eckhard,
Hello Timothy,

Thanks for your feedback. I'm sure I'll get my act together with this to 
help me!

Eckhard, to answer your questions:

- Only warnings are for encrypted content (models) which is normal and 
then one for a node without DC path. But it is autoconnected to the 
right node anyway, so it should not matter.

- I did not try a "slow" transient extraction, I have used only the 
testbenches provided by s2ibis3 and the other tool.

- Nope, the curves reflect this "jumpy" behaviour. But IBISCHK5 does not 
mind a bit.


Best regards,  Lars
-- 
Those who can, Do
Those who can't, Simulate

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Tue Dec 15 08:52:31 2009

This archive was generated by hypermail 2.1.8 : Tue Dec 15 2009 - 08:54:03 PST