You can have Eldo create HSPICE compatible .lis files by using different
print file options in your top level .sp or .spi file.
Timothy Coyle
President
Signal Consulting Group LLC
405 Western Ave #430
South Portland, ME 04106
Tel: 617.297.2566
Email: <mailto:tim.coyle@siconsultant.com> tim.coyle@siconsultant.com
Web: <http://www.siconsultant.com/> http://www.siconsultant.com
<http://www.sharksim.com/> SharkSim - Signal Integrity IBIS Modeling
Software
From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On Behalf
Of Syed Huq (huqs)
Sent: Friday, March 19, 2010 12:57 PM
To: Lance Wang; Brijesh A Shah
Cc: ibis-users@eda.org
Subject: RE: [IBIS-Users] S2IBIS3 V1.1 with eldo: not generating stimulus
file for ramp
Importance: Low
The tool supports multiple Spice engines so why can't it support the output
format of Eldo or is Eldo not part of the Spice engines it supports.
-syed
From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On Behalf
Of Lance Wang
Sent: Friday, March 19, 2010 8:23 AM
To: 'Brijesh A Shah'
Cc: ibis-users@eda.org
Subject: RE: [IBIS-Users] S2IBIS3 V1.1 with eldo: not generating stimulus
file for ramp
Hi, Brijesh,
This is because Eldo compnet will not generate .lis file. It's chi file is
not the exactly the same format as hspice lis. So, I don't think s2ibis3
will be able to read data in.
Lance Wang
978-764-2298
IO Methodology Inc.
SIMDE V2.0 - The best IBIS modeling tool on the market
Now it is integrated with HSpice, Eldo, Spectre and TISpice3
www.iometh.com <http://www.iometh.com/>
_____
From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On Behalf
Of Brijesh A Shah
Sent: Thursday, March 18, 2010 5:43 PM
To: ibis-users@eda.org
Subject: [IBIS-Users] S2IBIS3 V1.1 with eldo: not generating stimulus file
for ramp
Hi Guys,
I am trying to generate IBIS using ELDO with S2IBIS3 v1.1. After adding
COMPNET and COMPMOD options in s2i file as well as COMPAT in netlist, it
made possible to run with eldo.
But it is not generating .spi file for ramp and gives following error:
pullupData_p.size :0
Exception in thread "main" java.lang.ArrayIndexOutOfBoundsException: -1
at sortVIData.sortVIData(s2ianalyz.java:605)
at analyzePin.analyzePin(s2ianalyz.java:1273)
at analyzeComponent.analyzeComponent(s2ianalyz.java:1459)
at s2ibis3.main(s2ibis3.java:102)
Any suggestions will be highly appreciated.
Thank you very much.
Best Regards,
Brijesh
-- This message has been scanned for viruses and dangerous content by <http://www.mailscanner.info/> MailScanner, and is believed to be clean. -- This message has been scanned for viruses and dangerous content by <http://www.mailscanner.info/> MailScanner, and is believed to be clean. -- This message has been scanned for viruses and dangerous content by <http://www.mailscanner.info/> MailScanner, and is believed to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993Received on Fri Mar 19 10:14:35 2010
This archive was generated by hypermail 2.1.8 : Fri Mar 19 2010 - 10:15:35 PDT