Re: [IBIS-Users] s2ibis2 issue

Yes that I get all the files needed to produce a .ibs file. It seemed at
the point when gathering
the data into the final .ibs file, something got wrong. So I am asking
for if any standalone tool
to put all output file into the standard ibs file. Thanks.

Best regards,
Jason

Syed Huq (huqs) wrote:
> The data format issue is a known problem but usually after the IBIS file
> is complied, you can edit out repeat data. I would not recommend doing
> this manually.
>
> The tool should simulate all the Typ, Min and Max conditions and then
> produce a .ibs file. Do you get to that point ? If yes, then you can
> edit the final .ibs file and get rid of garbage data usually at the end
> of each V/I tables.
>
> Your other choice is to try the s2ibis3 also available from the IBIS
> site under:
> http://www.eda.org/ibis/home/tools/tools.htm
>
> There are also commercial tools available to do this job. Don't ask me
> since I won't recommend any.
>
> -syed
>
> -----Original Message-----
> From: Jason Ma [mailto:Jason.Ma@analog.com]
> Sent: Wednesday, May 26, 2010 9:34 PM
> To: Syed Huq (huqs)
> Cc: ibis-users@eda.org
> Subject: Re: [IBIS-Users] s2ibis2 issue
>
> Hi Syed,
>
> Thanks. I think you have noticed that there are some abnormal data in
> the put.out
> file. I also listed below:
>
> 20 -0.999999999999998 4.98199344324096
> 21 -0.799999999999998 4.12877792596131
> 22 -0.599999999999998 4.01970481456261
> 23 -0.399999999999998 4.01940828279669
> 24 -0.199999999999998 4.02194525365832
>
> So I am mentioning that there may something wrong. Actually I can
> correct these data
> manually. Do you know any tool to read these output file and gather the
> data in to a ibis
> file?
>
> Best regards,
> Jason
>
> Syed Huq (huqs) wrote:
>
>> Hi Jason,
>> Your attached put6.out file is a function of how you setup the .s2i
>>
> file
>
>> as well as your spice input files.
>> The s2ibis2 tool is simply running a spice simulation of your input
>>
> file
>
>> and producing the output as you see.
>> So the problem needs to be debugged.
>>
>> For example,
>> Look at your put6.spi file and check if that is correct.
>> For a sanity check, run HSPICE on this file and compare the output to
>> your put6.out
>>
>> If you are not familiar with the translation method, look under the
>> /example folder of the installation of s2ibis2 and run those first.
>>
>> -Syed
>>
>> -----Original Message-----
>> From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On
>> Behalf Of Jason Ma
>> Sent: Wednesday, May 26, 2010 6:57 PM
>> To: ibis-users@eda.org
>> Subject: [IBIS-Users] s2ibis2 issue
>>
>> Dear Sir/Madam,
>>
>> I am a design engineer working for ADI. I am having a problem when I
>>
> am
>
>> trying to generate an IBIS model with s2ibis2.
>> After run s2ibis2, I read the *.out data and found some abnormal data
>> included, please refer to the attachment. So using the ibischk3 for
>>
> the
>
>> generated ibis model, it showed a lot of error messages. Could you
>>
> help
>
>> to look at this problem? It will be good if we can generate the output
>> file without abnormal data. In another way, I can correct the abnormal
>> data manually, and could we use something to put the output file
>> together for the ibis model file (*.ibs)? Thanks a million.
>>
>> Best regards,
>> Jason
>>
>>
>>
> ************************************************************************
>
>> ******
>>
>>
>> S2IBIS2 VERSION NUMBER: s2ibis2.linux v1.1
>>
>> PLATFORM (SPARC, HP700, PC, etc.): A Sun Fire X4100 Server, x86_64
>>
>> OS AND VERSION: Linux 2.6.9-89.0.9.ELsmp #1 SMP
>>
>> REPORTED BY: Jason
>>
>> DATE: May 26, 2010
>>
>> DESCRIPTION OF BUG:
>>
>> the output file (*.out) contained some abnormal data, and the
>>
> generated
>
>> ibis file (*.ibs) showed some error messages.
>>
>> INSERT FILE DEMONSTRATING THE BUG:
>>
>> put.out
>>
>> --
>> This message has been scanned for viruses and dangerous content by
>> MailScanner, and is believed to be clean.
>>
>>
>>
>>
>
>
>

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993