[IBIS-Users] Mismatch between ibischk and load lines

Hello,

I am working on an IBIS Model and the golden parser (I have used 4.1, 4.2, and 5.0 and my model is IBIS 4.2) gives me errors (on the high side - pull up curve) on one of my outputs. I have independently verified the load line and where it crosses the PD and PU curves, and the crossing exactly matches my transient end values, and does not match what the parser is claiming the crossings are. What could I be doing wrong?

Best,

-Peggy

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993