[IBIS-Users] RE: [SI-LIST] Ibis model Receiver help.

Peter,
If you have pure internal circuitry between the p and n pins, you can try to
model the current within IBIS clamp data.

Regards,

Lance Wang
978-764-2298
IO Methodology Inc.
www.iometh.com

-----Original Message-----
From: si-list-bounce@freelists.org [mailto:si-list-bounce@freelists.org] On
Behalf Of Peter LaFlamme
Sent: Wednesday, November 03, 2010 8:34 AM
To: ibis@eda.org; ibis-users@eda.org; si-list@freelists.org;
peterlaflamme@comcast.net
Subject: [SI-LIST] Ibis model Receiver help.

>
> Hi All,
> I have a differential receiver model which has an internal 100-ohm series
> resistor. However there is other circuitry between the P and N pins. Can
> someone tell me if there is a way to use the [series resistor] keyword to
> model this or is there another way to add this to the ibis model?
>

> Thanks,
> Peter
>

CONFIDENTIALITY NOTICE: This e-mail message, including any attachments,
is for the sole use of the intended recipient(s) and contains information 
that is confidential and proprietary to AppliedMicro Corporation or its
subsidiaries.
It is to be used solely for the purpose of furthering the parties' business
relationship.
All unauthorized review, use, disclosure or distribution is prohibited.
If you are not the intended recipient, please contact the sender by reply
e-mail
and destroy all copies of the original message.

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@freelists.org with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@freelists.org with 'help' in the Subject field

List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:
                http://www.freelists.org/archives/si-list
 
Old (prior to June 6, 2001) list archives are viewable at:
                 http://www.qsl.net/wb6tpu
  

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993