Hello,
That is just an example. You don't have to
use that number in your models...
Arpad
============================================
-----Original Message-----
From: Silva, Estella [mailto:Estella.Silva@nsc.com]
Sent: Thursday, December 16, 2010 4:58 PM
To: Muranyi, Arpad; ibis@eda.org; ibis-users@eda.org
Subject: Question on AMI Standard
Hi,
In Section Section 10 of version 5.0, Paragraph 3.1.2.4 sample_interval,
Can you please explain why sample_interval = (lowest_bit_time/64)
Why is "64" selected?
Thanks & best regards,
Estella
-- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993Received on Thu Dec 16 21:18:29 2010
This archive was generated by hypermail 2.1.8 : Thu Dec 16 2010 - 21:19:07 PST