Amin,
Looks like the answer is NO. Even though the EBD syntax is
almost identical to the package syntax for the multi-segment
uncoupled T-line style trace descriptions, the lumped RLC
coupled matrix syntax of package models is not available
for EBD models.
Thanks,
Arpad
==============================================================
From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On
Behalf Of Maher, Amin
Sent: Wednesday, June 08, 2011 5:36 AM
To: ibis-users@eda.org
Subject: [IBIS-Users] mutual inductance in EBD files
Hello experts,
Is there a way to describe mutual inductance (coupling) between EBD
paths.
Regards,
Amin Maher
-- This message has been scanned for viruses and dangerous content by MailScanner <http://www.mailscanner.info/> , and is believed to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993Received on Thu Jun 9 10:04:32 2011
This archive was generated by hypermail 2.1.8 : Thu Jun 09 2011 - 10:04:51 PDT