Hi Fabio,
One thing to keep in mind is that S2IBIS defaults to a transient time of 10ns. So you will need to add the keyword to your s2ibis file to lengthen this time to accommodate the longest transient time to prevent data truncation.
Regards,
-Graham
Link:
http://www.ece.ncsu.edu/erl/abstracts/s2ibis2_doc.html
[Sim time] t
t = Spice transient simulation time
Optional.
Default: t = 10ns.
Describes the transient simulation time to be used by Spice.
From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On Behalf Of Timothy Coyle
Sent: Friday, July 08, 2011 11:02 AM
To: 'Fabio BRINA'; 'ibis-users'
Subject: RE: [IBIS-Users] V-T different durations
Hi Fabio,
I asked this same question a few months ago and from what I recall the responses were that most modern EDA tools can properly account for the different VT length durations and it is not an IBIS spec violation. I was concerned with potential over-clocking situations based upon the different VT duration lengths. I have not done any follow up testing myself.
I have run into issues with some EDA tools that in certain situations do have problems with these types of models. So you may want to do some testing at least with one EDA tool to make sure it's not going to produce unexpected results.
Best,
Tim
From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On Behalf Of Fabio BRINA
Sent: Friday, July 08, 2011 10:24 AM
To: 'ibis-users'
Subject: [IBIS-Users] V-T different durations
Hello experts,
a simply question (I suppose!) :
Can I have different durations for the four V-T waveforms ?
Till today I generated Rising0, Rising1, Falling0, Falling0 curves
using the same durations, but Can I have the following situations:
Rising0 --> 12 ns duration
Rising1 --> 10ns duration
Falling0 --> 8ns duration
Falling1 --> 11ns duration
Standard does not preclude it, but can cause problems to user?
Thank you in advance.
Fabio
-- This message has been scanned for viruses and dangerous content by MailScanner<http://www.mailscanner.info/>, and is believed to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner<http://www.mailscanner.info/>, and is believed to be clean. Conexant E-mail Firewall (Conexant.Com) made the following annotations --------------------------------------------------------------------- ********************** Legal Disclaimer **************************** "This email may contain confidential and privileged material for the sole use of the intended recipient. Any unauthorized review, use or distribution by others is strictly prohibited. If you have received the message in error, please advise the sender by reply email and delete the message. Thank you." ********************************************************************** --------------------------------------------------------------------- -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993Received on Fri Jul 8 10:52:23 2011
This archive was generated by hypermail 2.1.8 : Fri Jul 08 2011 - 10:52:57 PDT