[IBIS-Users] RE: On-die decap modeling in IBIS 5.1

Hello all,

I would like to understand about on-die decap modeling in IBIS 5.1 models and how PDN analysis is done using the same. Any help would be appreciated.

Thanks,
Rinsha

From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On Behalf Of Rinsha Reghunath
Sent: Monday, July 08, 2013 2:41 PM
To: ibis-users@eda.org; ibis@eda.org
Subject: [IBIS-Users] On-die decap modeling in IBIS 5.1

Hi all,

How do we model RC on-die decap in IBIS 5.1 models?

I read about using "Series" model type and [Series Pin Mapping] keyword to model decoupling circuit, but would like to understand more about the same. Please guide with reference materials or explanations.

Thanks,
Rinsha

--
This message has been scanned for viruses and
dangerous content by MailScanner<http://www.mailscanner.info/>, and is
believed to be clean.

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail mikelabonte@eda-stds.org
|or ibis-request@eda-stds.org
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/ibis/email_archive/ Recent
|  http://www.eda-stds.org/ibis/users_archive/ Recent
|  http://www.eda-stds.org/ibis/email/         E-mail since 1993