Re: [IBIS-Users] Modeling of Capacitance in Differential Receiver

From: Aubrey Sparkman <asparky@sparkright-solutions.com>
Date: Thu Dec 04 2014 - 17:49:48 PST
Mannish,

Since the circuit you've drawn is external to the receiver, why would you want to model it in ibis?   Simple discrete components would be way easier to implement and probably simulate faster.  

Aubrey 

Sent from my iPhone

> On Dec 4, 2014, at 7:12 AM, Manish BANSAL <manish-ftm.bansal@st.com> wrote:
> 
> Hello All,
>  
> I have a differential receiver as  following where there is capacitance (Cmid shown in Fig.) connected to the middle of the termination resistance with ground.
>  
> <image002.png><image004.png>Is there any method to model this capacitance in IBIS ?
>  
>  
>  
>  
>  
>  
>  
>  
>  
>  
>  
>  
>  
>  
>  
>  
>  
> Thanks & Regards,
> Manish
> 
> -- 
> This message has been scanned for viruses and 
> dangerous content by MailScanner, and is 
> believed to be clean.
> <Differential_Rx.png>

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail mikelabonte@eda-stds.org
|or ibis-request@eda-stds.org
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/ibis/email_archive/ Recent
|  http://www.eda-stds.org/ibis/users_archive/ Recent
|  http://www.eda-stds.org/ibis/email/         E-mail since 1993
Received on Thu Dec 4 17:50:23 2014

This archive was generated by hypermail 2.1.8 : Thu Dec 04 2014 - 17:50:46 PST